All-Terrain Mowers

ATM72LC  

ATM 72LC

Click below for the
ATM Mowing Video

-With a unique automatic self-leveling system the ATM-72LC keeps the operator, engine and controls vertical for mowing on slopes up to 34 degrees, depending on turf conditions. 
-The two halves of the 72" deck float independently for a quality cut in ditches, over crowns, and on uneven terrain.
-Hydrostatic drive and power steering combined with excellent visibility make this machine nimble and efficient.
-Hydraulic center-deck lift and hand-crank caster wheel adjustments allow for quick and easy deck height adjustment.

     

Specifications

 
Engine 30.2 HP, Yanmar Liquid Cooled Diesel Engine, Displacement: 1.3 liters, 81.22 cu. in., 61.9 ft lb torque, fully pressurized lubrication system & 6 qt. cooling system
Electrical System

12 Volt, 45 Amp Electrical System

Battery 440 Cranking amps, Gel type
Air Filter Dry canister type air filter
Fuel Filter Dual element filter and water separator combination
Hydraulic Systems:
Ground Drive
Oilgear Hydrostatic Transmission, two Parker wheel motors for center drive wheels (848.4 ft/lbs torque)
Leveling
Automatic hydraulic self-leveling to 34 degrees with manual override keeps operator and engine in upright position
Blade Drive
Parker Direct Hydraulic -  no belts or gear boxes
Deck Lift
Hydraulic Center
Speed Control Foot operated Speed Control - Self-Centering to Neutral
Ground Speed 0-11 MPH Ground Speed
Deck Caster Tire 11" X 4.00 X 5" - Foam filled
Drive Tire 25" X 12.5" X 12" All Terrain Tread
Stabilizer Tire 16.5" X 6.5" X 8" Foam filled
Gauges Engine water temp., Volt and Hour meters, Oil pressure, and Fuel
Parking Brake Hand Operated drum-type mechanical parking brake
Seat Adjustable UV resistant Vinyl Suspension Seat with Armrests and Seat Belt
Fuel Capacity 13 Gallon (U.S.), fuel level indicator on fuel tank
Hydraulic Oil Capacity Reservoir 8 Gallon (U.S.)
System Filter Hydraulic Filter, 10 Micron with Hydraulic Oil Cooler
Cutting Width 72"
Cutting Deck Type Rear discharge - Two 36" decks, independently free floating with ability to cut in the center of V-ditches or over crowns
Inside Turning Radius 24" Diameter
Cutting Height Adjustable from 2" to 6"
Overall Dimensions 107" Length, 74" Width, 91" Height
Deck Construction Rugged, Reinforced 10 Gauge Steel
Frame Construction Fabricated, Welded Steel
Wheelbase 65.5"
Ground Clearance At center of machine - 6.5"
Weight 2,245 lbs.
Safety Certified Roll-Over Protection System (ROPS) with Hazard Lights
Safety Deck Shutdown Hydraulic system hot oil shutdown
Optional Equipment Canopy from Sun Guard
Inclinometer
Wheel weight

 

 

 

one year warranty

Excludes Wearable Parts

 

 

 

 

To see literature on the ATM 72LC please click on the link below.

Literature